Home
Back
Irrigation Water Use Formula:
| From: | To: |
Irrigation water use calculation estimates the volume of water required for agricultural irrigation based on crop area and irrigation depth. This is essential for water resource management and agricultural planning in British Columbia.
The calculator uses the irrigation water use formula:
Where:
Explanation: The calculation converts the area and depth measurements to determine the total volume of water required in cubic meters (m³). 1 hectare-millimeter equals 10 cubic meters.
Details: Accurate irrigation water use estimation is crucial for sustainable water management, agricultural planning, irrigation system design, and compliance with water regulations in British Columbia.
Tips: Enter crop area in hectares and irrigation depth in millimeters. Both values must be positive numbers. The calculator will provide the water use in cubic meters.
Q1: Why is irrigation water use important in BC?
A: British Columbia's agriculture relies on efficient water use, especially during dry seasons. Proper calculation helps conserve water resources while maintaining crop health.
Q2: How accurate is this calculation?
A: This provides a theoretical calculation. Actual water needs may vary based on soil type, crop variety, weather conditions, and irrigation efficiency.
Q3: What's the conversion factor between mm and m³?
A: 1 mm of water over 1 hectare equals 10 m³ of water (since 1 ha = 10,000 m² and 1 mm = 0.001 m).
Q4: Should I consider irrigation efficiency?
A: Yes, for practical applications, divide the calculated water use by the irrigation efficiency factor (typically 0.7-0.9 for most systems) to get the actual water requirement.
Q5: Are there seasonal variations to consider?
A: Yes, irrigation requirements vary by season, crop growth stage, and regional climate patterns in British Columbia.